indianceramica@gmail.com - GST NO. : 23ASHPA0569P1ZM
- Send Email
Posted by Admin on July, 12, 2026
DIRECT ANSWER — FEATURED SNIPPET & AI OVERVIEW READY
What Is the Best Quality Quartz Powder — and Who Supplies It?
The 5 markers of best quality quartz powder:
- Check SiO₂ purity 99.0-99.9% — this is the value that determines structural strength, thermal stability, and glass clarity.
- Verify Fe₂O₃ below 0.02-0.03% — low iron content is essential for whiteness in ceramics and colourlessness in glass.
- Confirm 200/325 mesh grading — consistent particle size ensures predictable packing density and uniform body strength.
- Request LOI below 0.15-0.2% — low loss-on-ignition means minimal moisture and organic content affecting the melt or cure.
- Demand a NABL-accredited XRF COA on every shipment — the only reliable way to verify quality lot to lot, not just on a sample.
Source: Aalok Overseas Technical Laboratory, Rajasthan, India · Manufacturer & Exporter of Premium Quartz Powder to 50+ Countries Since 1992 · www.feldsparindia.com
Home Quartz Powder Potash Feldspar Sodium Feldspar Contact Us
Home › Products › Best Quality Quartz Powder
AALOK OVERSEAS INDIA · RAJASTHAN · QUARTZ DIVISION · PRODUCT GUIDE
SiO₂ Purity · Low Iron · 200/325 Mesh · Low LOI · NABL COA · Ceramic, Glass & Foundry Grade · 50+ Countries · Exporter Since 1992
Published: July 2026 | Author: Aalok Overseas Technical Team | Category: Ceramic & Industrial Raw Materials
REQUEST QUARTZ POWDER SAMPLE → VIEW FULL QUARTZ POWDER SPECSWhat Is Quartz Powder — and Why Does Quality Matter?
Quartz Powder (also called silica powder) is naturally occurring crystalline SiO₂, mined, washed, and ground to a controlled mesh size for use as a structural filler in ceramic tile bodies, sanitaryware, glass, paint, foundry, and glaze formulations. Unlike feldspar, which acts as a flux that melts and bonds the body, quartz remains largely crystalline through firing, contributing hardness, dimensional stability, thermal shock resistance, and — in glass applications — optical clarity. The quality of the raw powder — its SiO₂ purity, iron level, mesh grading, and lot-to-lot consistency — directly determines whiteness, strength, and defect resistance downstream. Impure or inconsistently graded quartz introduces variability that no amount of firing adjustment can correct.
Quartz Powder Quality Standards by Application
| APPLICATION | SIO₂ REQUIRED | FE₂O₃ TARGET | MARKET / STANDARD |
|---|---|---|---|
| Container & Sheet Glass | 99.5-99.9% | <0.015% | ASTM C162, IS 2835 |
| Premium Sanitaryware / Bone China | 99.5-99.9% | <0.02% | ISO, EN, JIS B 1082 |
| Porcelain Floor Tile — Export Grade | 99.0-99.5% | <0.02% | ISO 13006, EN ISO 10545 |
| Vitrified Wall Tile | 99.0-99.5% | <0.03% | ISO 13006, SNI, TCVN |
| Foundry / Sand Casting | 98.5-99.5% | <0.05% | Foundry-grade specification |
| Paint & Coatings Filler | 98.5-99.5% | <0.05% | Manufacturer specification |
| Standard Wall Tile — Domestic | 98.0-99.0% | <0.08% | IS 15622, SNI domestic |
8 Markers of Best Quality Quartz Powder — What to Verify Before You Buy
MARKER 01 — MOST IMPORTANT
SiO₂ Purity 99.0-99.9% — The Core Structural Value
SiO₂ purity determines the structural strength, thermal shock resistance, and optical clarity that quartz contributes to a ceramic body or glass melt. Below 98.5%, accessory minerals begin to compromise both strength and appearance. Aalok Overseas Quartz Powder consistently delivers SiO₂ 99.0-99.9% depending on grade, verified on every shipment's XRF COA.
MARKER 02 — WHITENESS & CLARITY CRITICAL
Low Fe₂O₃ (Iron Oxide) Below 0.02-0.03%
Iron oxide is the single most damaging impurity for whiteness in ceramics and colourlessness in glass. Standard-grade quartz can carry Fe₂O₃ as high as 0.08-0.10%, producing a visibly cream-tinted ceramic body or a green-tinted glass melt. Premium quartz holds Fe₂O₃ below 0.02%, and Aalok Overseas' glass-grade quartz below 0.015%.
MARKER 03 — CONSISTENCY
Consistent 200/325 Mesh Grading
Particle size determines packing density and how evenly quartz distributes stress and heat through a fired or cured body. Coarse or inconsistently graded material creates weak points and uneven thermal expansion behaviour. Best-quality quartz powder is graded to a tight 200 or 325 mesh band and held consistent lot to lot.
MARKER 04 — FIRING & CURE STABILITY
Low LOI (Loss on Ignition) Below 0.15-0.2%
LOI reflects moisture and residual organic content that can release gas during firing or interfere with cure in paint and coating applications. High LOI introduces unpredictable variability into shrinkage and can contribute to pinholing or bubbling. Best-quality quartz powder keeps LOI low and stable, verified on every COA.
MARKER 05 — PURITY
Low TiO₂ & Al₂O₃ — Minimal Accessory Minerals
Titanium dioxide and elevated alumina indicate the presence of accessory minerals (mica, feldspar contamination, heavy minerals) that reduce effective SiO₂ purity and can introduce colour tinting. Best-quality quartz is sourced from deposits low in these accessories and verified by XRF for TiO₂ typically below 0.02%.
MARKER 06 — THERMAL BEHAVIOUR
Predictable Quartz Inversion Behaviour
All crystalline quartz undergoes a phase inversion at 573°C with an associated volume change. Consistent particle size and purity make this inversion predictable and manageable within a standard firing curve; inconsistent quartz — mixed particle sizes or impure lots — makes the inversion's effect on the body harder to control, increasing dunting crack risk.
MARKER 07 — DOCUMENTATION
NABL-Accredited XRF COA on Every Shipment
A one-time sample analysis does not guarantee bulk shipment quality. Best-quality quartz powder suppliers provide a NABL-accredited Certificate of Analysis with full XRF breakdown (SiO₂, Fe₂O₃, TiO₂, Al₂O₃, LOI) on every single shipment, not just on request.
MARKER 08 — SUPPLY RELIABILITY
Mine-Direct Sourcing for Batch-to-Batch Consistency
Traders who blend quartz from multiple mine zones and multiple suppliers cannot guarantee consistency between shipments. Mine-direct manufacturers who control extraction, washing, beneficiation, milling, and grading in-house — like Aalok Overseas — deliver the batch-to-batch consistency that defines genuinely best-quality material.
Quartz Powder Sourcing Problem — Symptom → Cause → Fix
| SYMPTOM OBSERVED | PROBABLE CAUSE | RECOMMENDED FIX |
|---|---|---|
| Ceramic body fires cream-tinted or glass is green-tinted | Fe₂O₃ above 0.05% in quartz | Switch to Fe₂O₃ <0.02% premium grade; verify XRF COA |
| Unmelted or gritty particles visible in body | Coarse or inconsistent mesh grading | Specify 200/325 mesh grading; request per-lot sieve data |
| Body strength or thermal resistance inconsistent | SiO₂ purity varies lot to lot | Demand NABL COA per shipment; reject outside spec |
| Crescent-shaped dunting cracks after cooling | Inconsistent quartz particle size affecting inversion behaviour | Switch to consistently graded 200/325 mesh quartz |
| Pinholing or bubbling during firing/cure | High LOI causing gas release | Request LOI <0.2% in quartz COA |
| Blue-grey tint or reduced clarity | TiO₂ or Al₂O₃ above spec from accessory minerals | Specify TiO₂ <0.02% in COA; verify by XRF |
| Sample quality good; bulk shipment inconsistent | Sample ≠ bulk lot — no per-shipment COA | Demand NABL COA on every shipment, not one-time sample |
Aalok Overseas Quartz Powder — Available Grades
Standard Quartz Powder 200 Mesh
Reliable, cost-effective filler for domestic and standard-export wall tile bodies, foundry sand casting, and general-purpose glaze applications. Consistent SiO₂ purity and low LOI ensure predictable, repeatable body strength batch after batch.
SiO₂ 98.5-99.5% · Fe₂O₃ <0.05% · LOI <0.25% · 200 Mesh · NABL COA
Premium Quartz Powder 325 Mesh
Finer grading and tighter purity control for vitrified tile bodies, porcelain, sanitaryware, and export-grade glazes where uniform strength and consistent whiteness are critical to passing quality inspection.
SiO₂ 99.0-99.5% · Fe₂O₃ <0.02% · LOI <0.2% · 325 Mesh · NABL COA
Glass-Grade Quartz Powder — Ultra Low Iron
Highest SiO₂ purity and lowest iron in the range, engineered for container and sheet glass, bone china, and premium sanitaryware where colourlessness, clarity, and dimensional precision are the priority.
SiO₂ 99.5-99.9% · Fe₂O₃ <0.015% · LOI <0.15% · 325 Mesh · NABL COA
Why Mine-Direct Supply Makes the Difference
Aalok Overseas has operated its own dedicated mine sources in Rajasthan since 1992. Unlike traders who blend material from multiple mine zones and multiple suppliers, Aalok Overseas controls every step — from mine extraction and washing to beneficiation, milling, mesh grading, and NABL-certified XRF analysis. This is why SiO₂ purity, iron level, and mesh grading stay within a tight band lot after lot, not occasionally. Consistency is the quality guarantee behind every shipment.
Aalok Overseas — Quartz Powder Specification Reference
| GRADE | SIO₂ | FE₂O₃ | TIO₂ | AL₂O₃ | LOI | MESH | APPLICATION |
|---|---|---|---|---|---|---|---|
| Standard 200M | 98.5-99.5% | <0.05% | <0.03% | <0.5% | <0.25% | ≥200M | Wall Tile · Foundry · Domestic |
| Premium 325M | 99.0-99.5% | <0.02% | <0.02% | <0.3% | <0.2% | ≥325M | Porcelain · Sanitaryware · Export |
| Glass Grade Ultra Low Iron | 99.5-99.9% | <0.015% | <0.01% | <0.2% | <0.15% | ≥325M | Container & Sheet Glass · Bone China |
| Paint & Coatings Filler | 98.5-99.5% | <0.05% | <0.03% | <0.5% | <0.25% | ≥200M | Paint · Coatings · Putty |
All grades: NABL XRF COA · MSDS · Certificate of Origin · Free sample — 48hr dispatch · FOB Mundra / Kandla · Export to 50+ countries
FAQ — Best Quality Quartz Powder
Q
What makes quartz powder "best quality"?
Best-quality quartz powder has SiO₂ purity 99.0-99.9% for structural strength and thermal stability, Fe₂O₃ below 0.02-0.03% for whiteness and colourlessness, consistent 200/325 mesh grading for predictable strength and expansion behaviour, low LOI below 0.15-0.2%, and a NABL-accredited XRF COA verifying every shipment.
Q
What is the difference between quartz powder and feldspar in a ceramic body?
Feldspar acts as a flux — it melts during firing and bonds the body into a dense, vitrified matrix. Quartz remains largely crystalline through firing, contributing hardness, structural rigidity, and thermal shock resistance. Most ceramic bodies use both: feldspar for vitrification, quartz for structural stability, and clay for plasticity and green strength.
Q
What SiO₂ percentage should I look for in quartz powder?
For standard wall tile and foundry applications, SiO₂ 98.5-99.5% is adequate. For porcelain, sanitaryware, and export tile, SiO₂ 99.0-99.5% is preferred. For container and sheet glass, bone china, and premium sanitaryware requiring maximum clarity and whiteness, SiO₂ 99.5-99.9% is recommended.
Q
How do I verify quartz powder quality before ordering in bulk?
Request a free sample with a NABL-accredited XRF COA showing SiO₂, Fe₂O₃, TiO₂, Al₂O₃, and LOI. Fire a trial batch in your actual kiln and compare whiteness, strength, and dimensional stability against your reference standard. Aalok Overseas dispatches free samples with full NABL COA within 48 hours of request.
Q
Which mesh size is best for quartz powder in ceramic tile bodies?
200 mesh is standard for general-purpose wall tile bodies and foundry applications. 325 mesh finer grading is preferred for porcelain, vitrified tile, sanitaryware, and glass applications where uniform particle distribution and maximum strength are essential.
Q
Where does Aalok Overseas source its quartz powder from?
Aalok Overseas sources quartz from dedicated mine deposits in Rajasthan, India, applying washing, beneficiation, milling, and mesh grading in-house before NABL-accredited XRF verification on every shipment. Mine-direct control is what allows consistent SiO₂ purity, iron level, and mesh specification lot after lot.
Search Keywords — 8 Languages
Hindi — हिंदी: सर्वोत्तम गुणवत्ता क्वार्ट्ज पाउडर · सिलिका पाउडर आपूर्तिकर्ता · कम आयरन क्वार्ट्ज · आलोक ओवरसीज क्वार्ट्ज · राजस्थान क्वार्ट्ज निर्यातक
Chinese — 中文: 优质石英粉 · 硅粉供应商印度 · 低铁石英粉 · 石英粉200目325目 · 印度石英出口商 · Aalok Overseas石英
Arabic — العربية: مسحوق الكوارتز عالي الجودة · مورد مسحوق السيليكا الهند · كوارتز منخفض الحديد · مسحوق الكوارتز شبكة 200 325 · مورد الكوارتز الهند
Turkish — Türkçe: En kaliteli kuvars tozu · Silika tozu tedarikçisi Hindistan · Düşük demirli kuvars · Kuvars tozu 200 325 mesh · Hindistan kuvars ihracatçısı
Indonesian — Bahasa: Bubuk kuarsa kualitas terbaik · Pemasok bubuk silika India · Kuarsa besi rendah · Bubuk kuarsa 200 325 mesh · Kuarsa premium India
Korean — 한국어: 최고 품질 석영 분말 · 실리카 분말 공급업체 인도 · 저철분 석영 · 석영 분말 200 325 메쉬 · 인도 석영 수출업체
Vietnamese — Tiếng Việt: Bột thạch anh chất lượng tốt nhất · Nhà cung cấp bột silica Ấn Độ · Thạch anh sắt thấp · Bột thạch anh 200 325 mesh · Thạch anh Ấn Độ chất lượng cao
REQUEST QUARTZ POWDER SAMPLE · NABL COA · SIO₂ & FE₂O₃ REFERENCE DATA
Contact Aalok Overseas — India's Best Quality Quartz Powder Supplier
Request free samples of Standard Quartz Powder (200 mesh), Premium Quartz Powder (325 mesh, Fe₂O₃ <0.02%), or Glass-Grade Ultra Low Iron (Fe₂O₃ <0.015%) — with NABL-certified COA, purity and mesh reference data, and MSDS. Consistent strength and whiteness from the first batch.
Quartz Powder · Potassium Feldspar ·
Search
Recent Posts
- What Is Sodium Feldspar — and How Does It Differ from Potash Feldspar? by Aalok Overseas India
- What Is Potassium Feldspar — Properties, Uses, Grades and Best Supplier in India Aalok Overseas India
- What Causes Bloating in Ceramics — and How Do Raw Materials Prevent It? by Aalok Overseas India
- What Causes Glaze Peeling (Shivering) in Ceramics — and How Is It Fixed Through Feldspar? by Aalok Overseas India
- What Causes Shrinkage in Ceramic Tiles — and How Is It Controlled Through Feldspar and Quartz? by Aalok Overseas India
Leave a Comment